|
Swizz Army 6 in 1 Cable Tester |
|
|
Quantity in Basket:
none
Code: Swizz_Army
Price: $114.95
Shipping Weight: 3.00 pounds
|
| |
Swizz
Army 6 in 1 Cable Tester
List Price $149.95
The Swizz
Army 6 in 1 Cable Tester is the
professional's choice for multifunction
cable testers. It is unlike any other
cable tester on the market.
The 6 in 1 displays the exact wiring of
any cable or adapter and even allows
testing of cables installed inside
building walls. Its patent pending
intermittent detection allows you to
wiggle a cable like crazy and know if
there was an intermittent connection
at any time- even if you didn't see
the LEDs change.
With the added functions of test-tone
generation, phantom power detect and
grounded XLR shield detect, the 6 in 1 is
the perfect utility tool for contractors,
studios, bands, broadcasting, churches,
project studios and more!
Connectors:
XLR, 1/4", RCA, 1/8", TT, MIDI
Functions:
The Cable Wiring Display clearly shows which pin is wired to what. The
Display also shows continuity, opens and shorts for each pin. This is also
perfect for determining how custom and adapter cables are wired- such as
XLR-1/4", 1/8" stereo dual RCA, etc.
- Intermittent
Detect and Display: Normally when testing for intermittent shorts, if you
blink while testing for a short you may miss it. The 6 in 1 is the only
tester that stores and displays the intermittent information until you reset
it. It even tells you which line has a problem. Don't let a blink ruin a
gig!
- Installed
Cable Testing inside of building walls is also enabled by the Cable Wiring
Display. Connect the 6 in 1 to one end of the cable and see if any of the
lines are shorted together. Then, connect a shorting connector onto the
other end of the cable and if the lines are good, the Cable Wiring Display
will show them as all shorted to each other.
- Test Tone
Generation: Generates a 1 kHz or 440 Hz tone at +4dBu, -10dBV and Mic
Levels.
- Phantom
Detect: Displays when a DC voltage is present on Pin 2 (tip) and Pin 3
(ring), individually.
- Grounded
Shield Detect: Confirms that the XLR connector shield is connected to Pin 1
(grounded).
|
|
|